Warning: Declaration of W3TC\DbCache_Wpdb::prepare($query, $args) should be compatible with wpdb::prepare($query, ...$args) in /home/hsmetalp/public_html/wp-content/plugins/w3-total-cache/DbCache_Wpdb.php on line 177
Sheet Metal Fabrication with Customized Material and Finish

Sheet Metal Fabrication

Upload your CAD files to get an instant online fabrication quote on custom formed sheet metal prototypes and production parts. Lead times as fast as days and free samples for testing.

sheet metal fabrication
Start A New Sheet Metal Fabrication Quote

Sheet Metal Fabrication Capabilities

Blank Size10’ x 20’ (3.05 m x 6.10 m). We accommodate larger part volumes upon request.
Sheet Thickness0.024” – 0.250” typical. We accommodate thicker or thinner gauges upon request.
General TolerancesFor single planes or flat parts, +/- 0.010” on edge to edge, edge to hole, and hole to hole features; +/- 0.010” on bend to edge/hole features. For multi-planed bent parts, +/- 0.030” for hole to hole/edge, edge to edge, and over-formed parts; +/- 1 degree for bend angles.
Braking (Hydraulic)10’ length, fingers from 3” – 6”
Punching2″ diameter hole capacity, or larger upon request
WeldingWelded edges and seams, weldments, and assemblies

Available Sheet Metal Material

AluminumAluminum 6061
Aluminum 5052
CopperCopper 101
Copper C110
Copper 260 (Brass)
BronzeBronze 220
Bronze 510
Stainless SteelStainless steel 301
Stainless steel 304
Stainless steel 316/316L
SteelA36, Q235

Sheet Metal Finishes Available 

A variety of material finishes are available for an instant online sheet metal quote. If you do not see the material finish combination you are looking for, please send us mail for detail requirements.

sheet metal material
StandardMinimal post-processing or treatment on parts is done.
Bead BlastThe part surface is left with a smooth, matte appearance.
Anodize (Type II Or Type III)Type II creates a corrosion-resistant finish. Sheet metal parts can be anodized in different colors—clear, black, red, and gold are most common—and are usually associated with aluminum. Type III is thicker and creates a wear-resistant layer in addition to the corrosion resistance seen with Type II.
Chem Film (Chromate Conversion Coating)This sheet metal finish provides corrosion resistance and good conductivity properties. Chem film can be used as a base for paint and can leave surfaces yellow or gold. Adds very little thickness, about 0.00001”-0.00004.”
Powder CoatThis is a sheet metal fabrication process where powdered paint is sprayed onto a part that is then baked in an oven. This creates a strong, wear- and corrosion-resistant layer that is more durable than standard painting methods. A wide variety of colors are available to create the desired aesthetic.
Electroless Nickel PlatingA sheet metal fabrication process that provides uniform nickel coating which offers protection from corrosion, oxidation, and wear on irregular surfaces. The finished part will be brighter.
Gold PlatingGold Plating provides good corrosion and tarnish resistance with excellent solderability.
Silver PlatingSilver offers high solderability and electrical conductivity but is susceptible to tarnish on sheet metal parts.

Click to send your DIY Metal drawing